Is It OK to Leave Phone on Wireless Charger Overnight

Is It OK to Leave Phone on Wireless Charger Overnight?

Leaving the smartphone on a wireless charging deck and waking up to find it fully charged is a convenience we have all used to. It is almost a part of our night routine, but it also produces particular concerns in people regarding the safety of smartphones. The most common concern is overheating the phone, which can lead to many problems. Some also believe leaving the phone on a charging mat overnight can damage the battery’s health. And it is precisely this curiosity that has made you click on this link.

Let’s find out whether there are any repercussions to leaving the smartphone on a wireless charger overnight in this piece.

What Happens When Your Phone Finishes Charging?

Typically, it takes a few hours to charge a smartphone completely, depending on the battery capacity. Once a smartphone charges to 100%, it stops drawing power because of the protection chips installed in it. Thus, even if you keep a phone charging long after it has charged completely, you will not experience overheating or other issues.

Furthermore, modern chargers also have protection chips installed in them. So, as the phone stops drawing energy, the charger detects it and stops providing power to the smartphone. Even though wireless charging has a different mechanism, which uses coils to deliver an electromagnetic field, it does not affect how a phone or charger responds to overcharging. 

In short, leaving a smartphone on wireless charging overnight does not pose any safety threats.

Should You Charge The Phone Overnight?

We have established that leaving a phone on wireless charging for longer than the required periods does not threaten safety. However, safety is not the only concern, as you must also want to protect your smartphone’s battery health. It is not as simple as safety, as experts have different takes on this issue. And to understand the theories of both sides, you have to understand a thing called “trickle charge.”

Once the battery reaches 100%, the phone does not stop functioning. A number of sensors and chips remain active to run the engine and applications in the background. Smartphones withdraw energy from the battery to keep these sensors and background applications running.  

So, after the phone has finished charging, it will drop to 99% because of the energy consumed by sensors and background applications. And the moment the battery drops to 99%, the smartphone will start charging again to make it 100%. This small withdrawal of energy from the charger is a “trickle charge,” It happens two to three times overnight.

Some experts believe that trickle charges can increase a smartphone’s temperature and expose the battery to stress owing to high voltages. It can damage the battery’s health in the long run. The other side opines that modern smartphone batteries are designed to prevent the harm associated with a trickle charge. However, it is not clear whether the batteries of all smartphones are equipped to mitigate damage by the trickle charge.

We can assume that all flagship smartphones have advanced technologies to protect their batteries from the potential damages of trickle charges. However, the same cannot be said about budget or mid-range smartphones. It must also be mentioned that wireless charging is slower than wired one, so while the number of trickle charges per night is fewer, they are not nonexistent.

Things You Should Do Before Leaving a Smartphone on Wireless Charging Overnight

There is no concrete evidence to support either of the two theories we discussed earlier. Furthermore, the fact that lithium-ion batteries degrade over time is a confounding factor that limits understanding of trickle charge on the overall health of a smartphone’s battery. While we are not suggesting stopping charging phones overnight and compromising on convenience, we can certainly recommend some tips to prevent potential damage. Let’s look at them;

  • Charge The Phone in Ventilated Area

Smartphones and heat do not go well together, and charging produces a certain amount of heat in the smartphone. If you place the phone on charging in an area that lacks ventilation, the heat will accumulate and damage the phone’s battery. On the other hand, a ventilated space dissipates the heat generated by charging and keeps the phone cool. 

  • Close Background Applications

As discussed earlier, a trickle charge happens because the phone requires energy to run applications in the background. While you cannot close all background applications, some can be stopped to preserve the battery and decrease the number of trickle charges. You can look at the applications in the settings and close the background operations which do not need them.

  • Use The Smartphone Manufacturer’s Recommended Charger

Chargers also play a key role in maintaining the health of a smartphone’s battery. Like smartphones, there are chips inside chargers that stop them from delivering power to the smartphone once fully charged. It is best to look for a charger that your smartphone manufacturer recommends. But if the smartphone company has not made any recommendation, get one from a reputed brand to protect the battery from long-term damage.

Several certifications can also help in identifying the quality of a wireless charging pad. You should look for Qi certification in the charging mat to ensure compatibility with smartphones and tablets. And also ensure that the charger complies with international safety standards and does not emit hazardous radiation. Regulations vary in different countries, but the standards to look for include KC, UL Listed, EAC, RCM, CE, FCC, and BSMI.

Myths About Charging a Phone Overnight

Several myths about charging a phone overnight exist, and most have no concrete evidence to support them. These include;

  • Overnight Charging Overloads Battery

Charging the phone overnight does not overload the battery because once it reaches 100%, it stops drawing power from the charger. So, once the charging is stopped, there is no way for the battery to become overloaded. Protection chips are installed in both charger and the smartphone, which prevent the flow of charge once the battery charges to its capacity.

  • Trickle Chargers Overheat The Phone

As discussed earlier, the average temperature of the smartphone gets higher when it is on charge. During overnight charging, the phone’s temperature will increase and come down once the battery hits 100%. It will be followed by a period of spikes in temperature because of the trickle charge, but it does not mean the phone will overheat. Trickle charge lasts very short, and there is a lot of time between two trickle charges. Hence, very little heat is generated by it, and the amount that is generated is dissipated earlier before the next cycle.

  • Batteries Should Always Drop To Zero Before Charging

Some people believe that the best way to wirelessly charge a phone is to drop the battery to under 10%, then put it on charge. However, it is not ideal for charging a modern lithium-ion battery. It wears the battery out faster than normal, making it an unsuitable technique to charge a smartphone. 


The best way to charge a modern lithium-ion battery is to go for partial discharge, which means charging a battery as soon as it hits the 50% mark.  You should only let the battery drop to zero when you want to recalibrate the sensor responsible for displaying the battery percentage. 


Does Leaving the Phone on a Wireless Charger Hurt the Battery?

Leaving a smartphone on a wireless charger for longer durations does not produce any safety-related issues, but some experts suggest a trickle charge can damage the battery in the long run. You can prevent potential damage by keeping the phone ventilated, using the recommended charger, and closing unnecessary background applications.

Can You Overcharge with Wireless Charging?

No, the smartphone and wireless chargers have protective chips installed in them. They stop the smartphone from drawing power once the battery reaches 100%.

Does the Wireless Charger Shut Off Automatically?

Modern wireless chargers have chips installed to detect the battery’s completion. Once a phone is charged completely, the charger will shut off automatically.

Is Wireless Charging Better Overnight?

Yes, wireless charging is better overnight because it charges the phone slower than wired chargers and decreases the number of trickle charges. Thus, it reduces the potential damage caused by a trickle charge to the battery.

Does Wireless Charging Emit more Radiation?

Wireless charging does not emit harmful radiation when not charging the smartphone. While charging the phone, wireless chargers emit around 3mG of EMF radiation which is generally considered harmful to the human body. However, the spread of these radiations is not enough to pose any threat to wireless charger users.

Final Words

Leaving a phone on wireless charging overnight does not produce any safety issues, but it may deteriorate the battery’s health in the long run. You can prevent the potential damage by simply closing background operations of the unnecessary applications and keeping the phone in a well-ventilated space. 


That is all for now; we hope this guide has been helpful.

Can Metal Detectors Detect Gold

Can Metal Detectors Detect Gold?

Whether treating it as a serious investment or just a friendly hobby, searching for gold requires that you have the equipment. Unless you’re Indiana Jones having traced the path to an ancient treasure, you need to make use of modern technology and hope you get lucky with your find.

A metal detector is an inseparable part of that adventure. It can make detecting valuable materials, even those hidden behind soil and debris, more convenient. Regardless of how well you do your research, you can face problems precisely detecting the gold deposits. Still, finding the perfect device that suits your needs and configuring it properly can be challenging.

Throughout this guide, you’ll learn all about the metal detectors that can help you detect gold. You’ll also know how to choose the best one you can order online or avail of from your nearest Walmart or Home Depot.

How Do Metal Detectors Work?

Before choosing the appropriate metal detector, it is best to understand how such a device works. Depending on the type of device you consider, metal detectors can work in any of the following types.

Beat-Frequency Oscillation (BFO)

One of the most basic types of metal detectors. It consists of two coils overlapping each other in a concentric pattern. Both are connected to an oscillator that generates thousands of pulses per second. Those propagate in the form of radio waves that undergo disruptions as they come across a metallic object.

A tiny receiver at the end of the detector picks up the frequency variation in the radio waves. It is connected to an audio device that generates a tone with regular beats. Those beats change as the radio waves detect a metallic article. While not exactly accurate or battery efficient, BFO metal detectors have a simple construction and can be used for small handheld devices.

Very Low Frequency (VLF)

A VLF metal detector has two or more concentric coils nearby. The outer coils are the active coils that have a current that switches direction within a short time. That creates a magnetic field that spans the inner coils and the surrounding area. The sensors measure the change if there is a disturbance in the field from a metal. The circuit then determines the distance or density of the metal.

The best part about VLF metal detectors is that they operate in a wide frequency range. Thus, they can be configured to detect gold within a decent range without drawing too much battery power. Most VLF metal detectors save you time by filtering out other metals and alloys.

Pulse Induction (PI)

Unlike VLF technology, PI metal detectors have a single coil that acts as both the transmitter and the receiver. It sends a pulse of magnetic waves outward and detects any disturbances from any metals that reflect them back. It’s more sensitive than a VLF variant but makes it hard to distinguish the type of metal.

Can Metal Detectors Detect Gold?

All kinds of metal detectors mentioned above can detect gold. However, some do it better than others. A pulse induction metal detector is best if you’re trying to detect any kind of conducting material. It can even detect high concentrations of saltwater. But, if you want to search for gold specifically, then a VLF metal detector is the most suitable.

Gold can exist in the form of nuggets or alloys with other metals like nickel, copper, and zinc. Thus, if you research the geographics of a location, you can conveniently configure a VLF metal detector to precisely detect those alloys up to an appreciable depth.

Desirable Specifications for Gold Metal Detectors

If you want a metal detector for finding gold, there are a few specific criteria you should consider for your apparatus.


Your metal detector should be lightweight enough to carry in a regular backpack. A retractable variant is best if you’re planning a long trek for your search. It also helps to equip your metal detector with a grip and stabilizer that reduces the stress on your arm.


Gold deposits are often found along river banks or areas close to water bodies. Therefore, you may have to get your feet wet literally to keep your search as thorough as possible. It’s desirable to have a waterproof metal detector for at least six feet (1.83 meters).

Battery Duration

When looking for gold out in the open, you may not have convenient access to a charging point. Thus, you must ensure that your metal detector has at least 8 hours of battery life past a full charge.

Operating Frequency

Your metal detector must operate at multiple frequencies to detect gold and its alloys precisely. Gold can be detected by metal detectors with 14 kHz or higher frequency.


The more you spend on metal detectors for gold, the more effort you save when searching for it. Still, it doesn’t help to get a top-of-the-line metal detector that you’ll only occasionally use for a hobby. So, consider your application and how many features you get with your device. You can study our best picks in the following section.

Best Metal Detectors To Detect Gold

Similar to cars, there are various makes and models of metal detectors. However, in the case of detecting gold, you can consider the below-mentioned variants.

Bounty Hunter 3410001

One of the least expensive options you can consider, the Bounty Hunter lives up to its name with a straightforward application. You can get it for less than $120, making it perfect for beginners and hobbyists. It’s best for searching for gold near the surface and shallow streams. The analog, lightweight design makes it a robust option for camping trips, and you can take it into the water without a second thought.

XP Deus 2

Whether you prefer scuba diving for lost shipwrecks or exploring the deposits across river banks, XP Deus 2 is the perfect tool. You can choose from multiple frequency settings, ranging from 4 kHz to 46 kHz. It has a waterproofing of more than 66 feet (20.11 meters) while also weighing just 1.65 pounds (0.75 Kg).

Garrett ATX

If you want to maximize your detection range, then Garrett ATX is the ideal choice. It is designed for rugged environments and soil types that contain multiple metal compositions. Utilizing PI technology, it can detect gold at varying depths thanks to its 13 sensitivity settings. The only downside is that it is more bulky and expensive than other metal detectors within its dimensions.

How To Detect Gold Using a Metal Detector

When looking for gold, you can’t just wave your metal detector around and expect to hit it big. There are specific procedures you have to follow, depending on what kind of terrain you encounter. Your search for gold can vary with the following techniques.

When Searching on Level Ground

It is best to keep the detector as close to the ground as possible. Ensure that it doesn’t run into any obstacles like rocks or wood, as they can damage the circuits. Move slowly and use a sweeping motion as you move ahead over the prospective area. Try to divide the area into several sections to save time and for a more thorough search.

When Searching in Shallow Water

Use footwear up to calf length to protect your leg against any hazards. When using a metal detector, don’t dip more than 2/3rd of the entire rod, since the water can damage the electronics and render the apparatus useless. Try to scan the shallow ends first before moving deeper into the water.

When Searching Underwater

Most metal detectors for underwater detection are quite compact. Thus, you can use them at any angle to detect gold formation within reefs and shipwrecks. Strive for a good grip with both hands and keep your diving goggles clear to read the instrument panel. Experts also recommend using a pair of waterproof headphones to ensure that you get a good tone without losing your bearings.

Frequently Asked Questions

What Is the Range of a Decent Metal Detector?

That depends on which version you consider. The cheaper variants can detect gold from a few inches afar. The more expensive variants can detect gold from up to six feet away.

Can I Make a Gold Metal Detector by Myself?

Yes. You can make a DIY gold metal detector using everyday items in your house. Here is a guide that can assist you with the process.

Should Gold Metal Detectors Be Waterproof?

Although you can find gold on dry ground, there are also likely to be rich deposits along river banks and other water bodies. So, it is best to carry a waterproof metal detector so that your search remains as thorough as possible.

Short Summary

Several types of metal detectors can detect gold, but the limit of their capabilities depends upon specific variants. We hope this guide helps you choose the best one for your next expedition. Don’t forget to test the product before taking it into the field for real.

Do Charging Stations Work on All Phones

Do Charging Stations Work on All Phones

Wireless phone charging makes it easier to keep your smartphone’s battery full. But if you’re thinking about purchasing a wireless phone charger, you’ll likely have some questions.

For example, you may be wondering if charging stations work on all phones, whether wireless charging is okay for your battery, and what kinds of phones are compatible with wireless chargers.

We’ll answer all of those questions and more in the sections below. So keep reading to get a complete overview of wireless phone charging.

What is Wireless Phone Charging?

Wireless phone charging allows you to refill your phone’s battery without having to use a cable or wall plug. The process typically works by placing your cell phone on a special charging pad.

Modern cell phones have a special induction coil inside of them that’s made of copper. This has a transmitter coil inside of it. When you put your cell phone on the charger, it will generate an electromagnetic field, which converts the charge into electricity that can refill your phone’s battery. It’s called electromagnetic induction.

The technology isn’t actually new. It’s been used by home products like shaving razors and electric toothbrushes for years. Manufacturers have finally figured out how to bring it to cell phones, much to the delight of smartphone owners everywhere.

Do Charging Stations Work on All Phones?

Charging stations work on the vast majority of all new phones, including iPhone 8 and later, Google Pixels, Blackberry Evolves, Huawei Mate, Galaxy S6, and later, and various phones from brands like Sony, Nokia, Motorola, Microsoft, and LG.

The bottom line is that if you have a relatively new smartphone (think 2017 or later), there’s a very high chance that it will be compatible with most commercially-available wireless charging stations.

This is because most phones have adopted the same wireless charging standard, called Qi. That means, at least for the time being, you don’t have to purchase a wireless charger from the same manufacturer that makes your phone.

However, it is worth mentioning that this could change in the future. Brands like Apple are known for wanting consumers to use products in their ecosystem, and we may see them try to pioneer a new wireless charging standard in the future.

How Do You Charge Your Phone with a Wireless Charging Station the First Time?

Using new technology for the first time can always present challenges – even if that technology is as straightforward to use as wireless charging stations. 

With that in mind, here are step-by-step instructions that you can follow to charge your phone with a wireless charging station.

1. Plug the wireless charging device into an outlet

First, the wireless charging device needs to build up some charge of its own. You do that by plugging it into an outlet and allowing it to build up a battery reserve.

Note that after the charging station has a full battery, you can use it to charge your phone without leaving it plugged into the outlet. However, not every charging station has a built-in battery, so make sure you get one that does if you want this capability.

2. Place your phone on the surface of the charging device

Next, you’re going to put your phone face up on the surface of the charging device. You don’t need to do anything special. Just follow the manufacturer’s instructions and make sure you place it directly over the surface of the charging station.

3. Wait a few seconds for charging to begin

Now all that’s left to do is wait. After a few moments, you should see your phone icon show that the device is charging. 

That’s it! You’re officially charging your phone on a station instead of with a plug and an outlet.

4. Try removing the case if it doesn’t work or disconnecting it from your USB

If your phone didn’t start charging after you followed the previous steps, then there are two main problems to check.

First, if you have a case on your phone, try taking it off and seeing if that fixes the problem. Phone cases can sometimes interfere with the signal that allows wireless charging stations to work.

You may also need to unplug your phone’s USB cable from your computer if you have it plugged in. Many phone models won’t connect to a wireless charging station if the phone is already connected to something else via a USB connection.

How Long Does Wireless Charging Take to Get a Full Battery?

The answer to this question can vary significantly based on factors like:

  • The type of phone and charging station you have
  • Air temperature
  • What the phone’s battery level is at before charging begins
  • How old is the phone, how old is its battery, and how old is the charging station

That being said, you should expect it to take between 3 and 4 hours to completely charge your smartphone when using a wireless charging station.

Manufacturers are working hard to design charging stations that can charge phones faster than this. But for now, somewhere between 3-4 hours for a full charge is the benchmark.

Is wired charging faster than wireless charging?

Yes, wired charging is still faster than wireless charging stations. You’ll typically be able to get a full charge within 2.5 hours when using wired charging instead of the 3-4 hours it takes with a wireless charging station.

Tips for speeding up the wireless charging process

The main downside to using charging stations today is that they’re slower than wired charging devices. However, there are steps that you can take to speed up the process when using a wireless charging solution.

Here are four steps you can take to make sure your charging stations refill your phone’s battery as quickly as possible.

Position your phone more accurately

You want your phone to be placed completely in the center of a charging station. That’s because this is how it gets the best wireless charging connection.

If your phone is hanging off to one edge or another, then centering it could help to speed up the charging process.

This isn’t guaranteed to make the charging process faster. But it is something that’s worth trying and can add up to make a big difference when combined with other changes in your charging method.

Make sure you’re charging in a room with a moderate temperature

It’s also important to keep in mind that charging stations are less effective in rooms with extreme temperatures. You’ll get a faster charge in a room with a moderate temperature than you would in a room that’s very cold or hot.

Try a newer phone

Another thing to note is that older cell phones and their older batteries take longer to charge in general – whether you’re using a wireless charging station or not.

If you’re getting frustrated that your phone isn’t charging fast enough, then that could be a sign that it’s time for an upgrade.

Try a newer wireless charging station

Wireless charging stations can also become less effective as they age. If you’re using an old charging station from a friend or relative, then an upgrade may be in order – especially if you’re trying to charge your phone with the device’s built-in battery instead of an outlet.

Is Wireless Charging Bad for My Phone’s Battery?

As a general rule of thumb, there’s nothing bad about charging wireless instead of through a wired connection.

However, wireless charging can generate more heat. If you’re using a charging station that doesn’t have a built-in cooling feature or one that gets excessively hot, this may cause your battery to wear out faster than usual.

One thing you can do to help prolong the life of your phone’s battery is to charge your phone less often. Try not to leave it plugged in overnight or for too long after it’s become full again. If you get into this habit, your phone will start running out of battery faster and faster.

Why is My Phone Not Charging on My Wireless Charger?

Even though charging stations work with most new phones, you may sometimes run into an issue where your phone doesn’t seem to benefit from wireless charging.

This can happen for several different reasons. We’ll cover three of the most frequent causes of a phone not charging wireless below.

It’s getting too hot

One reason why this may be happening is that the charging station is causing your phone to get too hot. This can disrupt the charging process and lead your phone to shut down as a safety feature.

The cable is broken

It’s also possible that the charging station’s cable is broken. This would lead to the station not being able to get power from the outlet and, therefore, not being able to transfer any power to your phone.

You need to enable wireless charging on your phone

Some phones require you to enable wireless charging before you can actively use the feature. This option will usually be located in your phone’s battery menu, which you can access via the settings screen.

image1 30

How to Keep the Kitchen Cabinets and Cupboards Clean?

There are so many areas that quickly get contaminated and expose more dirt, bacteria, and grease like the kitchen cabinets and cupboards. Adults and children keep on opening and closing the cabinets; cooking grease and condensation from outside temperature affect the cabinets that insist you clean the kitchen appliances daily if not then on a weekly basis.

If you interested in spending time in the kitchen, then eventually you need in-depth cleaning because of splatters, grease, and spills. During the cooking, we usually wipe down from tabletops, counters, and stoves but clean them weekly with Clorox disinfecting spray. It is beneficial to kill germs, bacteria, and other microorganisms. 

Deep Cleaned Kitchen Cabinets

No doubt, cleaning the kitchen cabinets and cupboards is a challenging task. But the cabinets are the center of almost every kitchen, which means people can quickly notice. Dirty fingerprints, watermarks, and food splatters are the main offender. Several cleaning tricks save time and schedule the alternates between deep-cleans and spot-cleans. Many folks have questions like do UV light sanitizers work in cleaning the kitchen cabinets, then yes, it advantageous cleaning products and necessary during in-depth cleaning. LuxUVC being a guide suggest you the best and easy way to clean all type of kitchen appliances.

Before following the step for each type of cabinet material, ensure that you must have all necessary cleaning supplies. For the standard cleaning, you can use conventional cleaning products like baking soda and vinegar. Analyze the material of the cabinet because your cleaning will be based only on the material. If you are confused about differentiating the wood cleaning material and laminate cleaning material, you can get advice from the cabinet professional.  

What Are The Primary kitchen Cabinets Materials That Need Cleaning?

There are various types of kitchen cabinets that require cleaning as per material. For the standard cabinets, you need the following material to clean:

  • General-purpose cleaner
  • Delicate general purpose cleaner
  • Baking soda & water
  • Vinegar/ white vinegar & water
  • Detergent & water. 

Cabinets are divided into the following parts:

  • Wood Cabinets
  • Painted Cabinets
  • Metal Cabinets
  • Long-Living Laminate 
  • Gorgeous Glass Doors

What Are The Simple Beginning Cleaning Hack?

Cabinets and cupboards mostly attract the exterior dirt regularly, which can be clean with the soft cloth and warm, soapy water, but it is not useful on the tough stains like grime and grease. To remove the tough stains, follow below suggested steps.

  1. Take a soap and water along with the microfiber cloth and dawn or Ivory detergent. After that, soak the cloth and scrub the surfaces. Attentively wipe the hinges, handles, and designed surfaces.
  2. With the soft cloth, cleanse the sideboards and doors punctually. After that, with another soft cloth mob, the remaining moisture.
  3. For the sturdy grease, use natural solutions, it gives positive results. Take one cup of white vinegar and two cups hot water and with that solution, wipe out most of the moisture, especially greasy cabinets and rinse it with a soft cloth.
  4. If any spots left, dip the cloth again in the undiluted white vinegar with more pressure wipe-down. 
  5. The grease and grimes which are really obstinate, for them make a paste of white vinegar and baking soda and check it on the cupboard to see whether it won’t mar the finish. Cleanse the cloth, wipe down the excess moisture, apply some of the paste, dump on the surface you want to clean, and wait for few minutes then smoothly rub with cloth or sponge to lift the grime.
Cleaning Wooden Cabinets

Clean Wooden Cabinets

Wooden cabinet requires focused cleaning, and the best way is to purchase oil-soap wood cleaner or Clorox disinfecting spray. They are generally present on the local hardware store; it’s a good option to clean the wood with everyday materials,

1. Household Detergent

To clean the wood cabinet, the owner can use the oil/ Laundry Detergent or grease-cutting dish. In general, cleaning, you can take two cups of water in each cup of detergent. Make sure the cabinet does not get overwet; otherwise, it could ruin the finish. Ones you applied the cleaning solution, scrub down with a separate dry cloth.

2. Vinegar/White Vinegar

If you don’t have laundry detergent, use the vinegar and water as a substitute. The vinegar entirely removes the sticky films caused by the dirty hands.

3. Baking Soda

The toughest stains can be removed by the baking soda, make a paste by mixing the baking soda with water and scrub the stain with the wet cloth.

Cleaning Of The Painted Cabinets.

The painted cabinets are much long-lasting than wood cabinet. The same products are used for cleaning as need for wood cabinet. In a painted cabinet, you don’t have to worry about finish; you can easily wipe hard enough to separate food-borne bacteria or dirt with general cleaners. In painted cabinets baking soda and water is used to remove the tough stains. If your cabinets have latex style, the scrub cautiously otherwise, you can scratch the surface. Wipe off with the warm water and delicate all-purpose cleaner. 

Cleaning Of The Metal Cabinets.

The most effortless surface cleaning is metal cabinet cleaning; all kinds of practice can work with metal except baking soda. Like you avoid overwet the wood same avoid the metal also. The elongate dampness can result in rust. 

  1. Take a sponge and damped into the cleaning solution of dish soap and warm water.
  2. If the warm water and dish soap don’t remove the stains from the metal, then use alcohol or Clorox disinfecting spray to wipe down the grease and grimes.
  3. If the metal has rust spots, then scrub gently with fine steel wool, avoiding the metal finish.
  4. Clean away the spots from the surface with alcohol and soap and let it completely dry. After that, use the blow dryer on the standard areas like joined corners, hinges where rust has been lifted.

Cleaning Of The Glass Doors.

The cleaning of glass doors and cupboards are the same.

  1. Remove the daily grime, spills, stains of food with the Clorox disinfecting spray or wipe with the warm soapy water and clean it with clear water.
  2. For the unscratched finish, take a 50 percent diluted vinegar and 50 percent of water or take a glass cleaner and ammonia.
  3. If the glass is covered with wood flame, gently wipe the frame so that no damage occurs to the finish of the door and cabinets.
Deep Cleaned Glass Door

If the glass has some decoration elements, then do not directly spray because it can cause seepage and discolor the wood. Spraying directly on the glass, spray it on the soft towel/cloth or lint-free paper towel after wiping the glass with the cloth. Dry the glass thoroughly with a paper towel or dry cloth.

Cleaning Of The Laminate Surface

Laminate surfaces are the most long-lasting and easy to clean and maintain. 

  1. Regular dust and wash the laminate.
  2. With the light dish soap and warm water, wipe the laminate surface and, after that, clear it with simple water and dry it with a soft cloth.
  3. To remove the tough stains, mix the hot water with white vinegar, or make a paste of vinegar and baking soda. 

image2 32

How to Disinfect Conference Rooms?

The conference room plays a vital place in every workspace and cleaning that regularly helps to destroy all the bacteria. Whether we are conducting weekly meetings, presentations, or business events, cleaning of the conference hall is essential for any workplace. If things are messy and unorganized, it may harm the productivity and success of the meeting. Following are the various tips provided to make your conference room always ready for the meeting:

Conference halls disinfection

Tips for cleaning your conference room:

Clean up all the messy things: 

After the busy meeting, all the things like notes, pens, food, and drinks lying after the session should be adequately cleaned. It is essential to turn off all the electronic devices like computers, speakers, projector, and camera, and then put back where it belongs. Every employee must clean up their area before leaving the room. If they bought anything that does not belong to the conference hall, ask them to take back after the meeting ends.  If anything left, the meeting leader must clean the space thoroughly and make it ready for the next presentation. 

Disinfect the surfaces:

Always use disinfecting wipes to disinfect the conference hall after the meeting, as cleaning alone will not be effective in controlling the virus or germs that can cause severe illness.  Use 70% alcohol-based sanitizer to disinfect or clorox disinfecting wipes all the shared equipment made up of metallic surfaces like door handles, security locks, keys, etc. You can also use a clean cloth, detergent, and water solution to remove all the dirt from the other area (for example, walls, picture frames, and bookcases). 

Turn off lights and equipment:

Once everything is completed, every employee must turn off all the devices before leaving the conference hall. It would help the company to save money as well as conserve energy.

Wipe windows and surfaces:

In today’s scenario, sometimes you have to do online meetings, and the dirt on the surface of windows and computer screens can affect your health or visibility of the screen. So to avoid it you should do proper cleaning of windows, mouse, keyboard, down the table and higher touched surface areas with Clorox disinfecting wipes.

Meeting table disinfection

Include Regular cleaning:

The conference hall is not much-visited as an office, but it is still essential to disinfect the area and clean the bins regularly. All the fabric seats should be vacuumed daily, so you should inspect the scraps and use the right disinfectant to get rid of the germs. The best choice is to hire the “janitorial services” that provide outsourced services to the customers. They can provide cleaning, taking out the trash, mopping floors while also promoting a happy and healthy environment to the employers. 

Difference between Cleaning and Disinfecting

Both terms are used to control the infection, but there is between them.

  • Cleaning mainly refers to removing all the germs and dirt from the surface. It only removes debris and is the first step of the disinfection process. 
  • Disinfecting is the process in which chemicals are used to kill or deactivate the bacteria or germs—deactivation results in stopping their reproduction or growth. Several common areas can be disinfected, such as doorknobs, keys, security locks, taps, tables, and electronic devices. It can be done by using bleach, chlorine, and alcohol-based products.

Disinfecting Agents:

  • Alcohol: Mixture of both water and alcohol are more active than absolute alcohol. It is one of the inexpensive methods that can be used and does not leave any residue. 
  • Chlorine Gas: It is mainly yellowish, and at high-pressure, this gas becomes liquid. It is mainly used as a water disinfectant and plays an essential role in removing all the pathogens from the surface. 
  • Electrostatic Method: It is the method that is mainly used for spraying disinfectants, sanitizers, etc. This process mainly helps to increase the effectiveness over a standard spray by 30%. In this method, when the chemical exits, it gives a positive charge; the droplets get attracted to the surface and get negatively charged. It is the new technique used to clean the desktop, floor, and walls and helps reduce the time. It improves infection control and helps to kill the germs and bacteria. 

Benefits of Disinfection

  • Free from allergy: The disinfection plays an effective role in reducing the cause of allergic problems. Deep wipes disinfecting of office hall is necessary to make the employers and the visitors healthier. 
  • Lower Health problems: The risk of transfer of diseases can also be lowered by disinfecting your workplace, which is one of the preventive measures for reducing the risk of health problems. Therefore minimizing the spread of illness is essential for keeping the workplace healthy.
  • Clean the quality of Air: The air quality can also be improved by cleaning the dirty area, which can cut down many respiratory problems.
  • For staff and Visitors: The cleanliness in the workspace helps to make better health of staff and visitors. A safe and healthy environment helps in improving employer efficiency and productivity.
  • Professional and Clean look: For example, while walking in the conference hall, the furniture, walls, and carpet full of dirt can leave a negative impression on the visitors. Therefore, it is necessary to keep the room clean and hygienic to create a fresh impression in front of clients and customers and to send positive vibes to them. 
  • High Cost of Effectiveness: While regular disinfecting services may save a bulk of the money, for example, if proper cleaning of furniture is done, it saves them from getting wear and tear. The superior quality of deep disinfecting of carpet, the chair ensures that these are safer to use, so there is no need for the replacement of the furniture.

What to consider when choosing an Ideal Disinfectant?

  • Is Safe: Some disinfectants may cause many problems like an irritation to eyes, skin, etc., and some have odor smell. By considering all these things, you should choose the disinfectant or the clorox disinfecting wipes that is safer and pleasant for staff and does not harm the worker who is cleaning the surface. 
  • Not to harm any Assets: Many types of equipment and furniture are expensive to repair or replace. Some disinfectants can affect the surface of expensive assets, which causes unnecessary damage. 
  • Check Kill Time: It tells how quickly the disinfectant kills the germs or bacteria. If you want to kill the germs the disinfectant, make sure to keep the surface wet for the entire time for making it work. It only requires thirty seconds to five minutes to eliminate the bacteria. Still, if it will take long about 10 minutes, it means the product itself contains solvent or alcohol that will evaporate quickly. 
  • Ease to use: Disinfectant should be available in convenient and multiple forms, durable enough to work efficiently and reliable enough to dry out quickly. You can choose the one available in convenient forms such as spray, wipes, and refillable containers.  
Disinfecting the conference area

It is recommended to every company that by using the criteria mentioned above, we can easily protect our employers and business from getting rid of the harmful virus. This is the best way to disinfect our workspace and kill all the germs and bacteria in the cheap and best way. A meeting leader should follow the rules and guidelines so that their work should be clean and disease-free, helping them increase productivity.  

image3 34

How to keep Hospital Equipment Clean and Disinfected?

The medical equipment is the utmost used and important stuff in the hospital to check the patient’s condition by medical professionals like doctors and technicians. The most used equipment in the hospital are:

  • Stationary or portable oxygen tanks
  • Bill lights and blankets
  • Electronic wheelchairs or Manual wheelchairs
  • Pressure mattresses
  • Breast pumps
  • Hospital beds
  • Nebulizers
  • Patient Lifts
  • Kidney machines
  • Traction equipment
  • Walkers, canes, crutches or any similar assistive equipment.
  • Insulin pumps
  • Oxygen concentrators ventilators
Cleaning Equipment

These equipment are the durable medical equipment that mainly provides therapeutic benefits for illness. The physician creates the demand for medical equipment, and in today’s scenario, the medical equipment is being used in hospitals and homes for patient care.

The above equipment is durable because it is designed for the comfort and safety of the patients. The first features of durable medical equipment include load-bearing strength and non-slip characteristics. Many studies had been conducted that shows annually 165,000 HALs patient prevent the threat due to proper cleaning. This is the responsibility of the hospitals cleaning staff to have an effective knowledge about cleaning medical equipment and facility surfaces. Appropriate cleaning can stop the spread of bacteria and other infections.

How Infection Chain Form?

As the patient went in and out of the room, many visitors visit, medical staff, roam through the buildings.  All of this form an infection chain as they all keeps moving from one place to another. The infection pattern form like:

  1. The attendant has more risk, sleep-deprived, and stress that make the worker ill.
  2. The infected agent can spread viruses, fungi, bacteria, or parasites.
  3. The growth of pathogens leads the infection chain like patients or the high-touch surfaces like doorknobs.
  4. The human takes the reservoir with hand and touch their facial parts that turn into sneeze and cough.
  5. The transmission process carries forward the infection chain.
  6. As moving the contaminated hand on the face is the entry portal of bacteria.

How To Break The Chain?

  1. The attendant must be aware of the patient’s health.
  2. To reduce the infection, you can use the decontamination, disinfection, effective treatment, and quick identification of microorganisms.
  3. To stop the pathogens from growing, you can cover your face while cough and sneeze, maintaining hand hygiene, and properly following the cleaning processes.
  4. To break the chain, you can wear PPE (personal protective equipment), hand hygiene, appropriate care during sick days.
  5. To stop the transmission process, control the negative airflow, and isolation precautions
  6. To prevent the virus from entering your body, wear gloves, goggles, and mask.

Methods To Disinfect Hospital Equipment?

The disinfection of hospital/medical equipment is extremely important, and the best way to sterilization. Whenever it comes to in-depth cleaning of medical equipment, the sterilization method is best. Using the inappropriate or inadequate sterilization method can result in the conveyance of infectious diseases that can prove dangerous. Below are the methods to sterilizing the hospital equipment:

1. Sterilization Through Steam

Commonly steam cleaning is used to clean the medical devices and counted as the cheapest option. Many techniques do not steam the heat-sensitive medical equipment, but the sterile processing department applies UV led light intense pressure that quickly destroys the microorganism on the object.  

The steam sterilization properly cleans the bacteria from the outside of the medical equipment. Before the sterilizing process start, cover the instrument to prevent damage.

For satisfactory results, expose the steam to devices surfaces. When you put the equipment inside the steam sterilizer, make some space between each piece so that all the equipment can move freely. Read the instruction by the manufacturer before starting the process.

2. Dry Heat Sterilization

If the steam sterilization does not clean the equipment properly, then make use of dry heat sterilization. This technique consumes high temperature and time; this is why it is not appropriate for many materials, but still effective than other options. It contains 340 degrees of dry heat to kill the microbial life.

Placing The Clean Medical Equipment

3. Chemical Solution Sterilization

There are some chemicals that are used in sterilization and that are as follows;

  • Hydrogen peroxide
  • Ozone
  • Bleach
  • Ethylene oxide

These chemicals can kill powerful pathogens, but they can harm humans. Dip the medical equipment into the chemical solution until the pathogen dies. Ones you satisfied rinse off the equipment and dry. Make-sure you do not sterilization the fiber optics, high sensitive materials, and biological material.

4. Sterilization Through Gas

Sterilization through hydrogen peroxide-based gas plasma kills the organisms from medical and dental equipment, including viruses, bacteria, and fungi. The plasma gas sterilizes the enclosed equipment that produces lower temperatures for total sterilization. The gas includes oxygen and water that protect the environment and medical staff. 

This method is quite expensive, but it is exceptionally useful for moisture-sensitive medical equipment and tool.

5. VHP Sterilizers

As you use the plasma gas, the same vaporized hydrogen peroxide (VHP) has been used. The only difference is you don’t use the plasma gas during the sterilization process. Whereas your VHP sterilization removes the humidity, and the generator injects the VHP for the perfect concentration.

The vapors remove the microorganisms effectively; the generator also reverses this process because that breaks the vapor into eco-friendly elements. 

What Is The Shared Patient Care Equipment?

The healthcare environment or share patient equipment need daily disinfection and must include in standard-based precautions. Always choose disinfection products like UV cleaning light or UV led light; these products are suitable and effective.

The equipment frequently cones into contact by medical staff to check the patients are blood pressure, thermometer, IV pumps, and wheelchairs. The wheelchairs divide as non-critical equipment because they require cleaning after each patient.

How To Sanitising And Storing Equipment?

The equipment that comes into contact with pathogen reservoirs surfaces like door handles and floor must be cleaned after each use by UV cleaning light.

For Instance: Washable clothes should be laundered under the heat to kill the fungi, viruses, bacteria, and other pathogens. Eliminate the risk of multi-use products, some of the organizations accepting the disposable microfibre system.

Thorough Cleaning Of Single Medical Equipment
  • Wet Mop: The wet mops are the frequent source of infection; the cleaning crew mop the area of the floor and coincidentally touch the mop’s damp part. The potential worker spread the bacteria from their hands and clothes. The professional microfibre removes the need for liquid cleaning chemicals.

Biohazard spill mops are more effective than regular mops; they eliminate the spreading of pathogens. These mops are designed to absorb bodily fluids. Then submerge in biohazard receptacle can totally disinfect the mop.

 The cleaning equipment must be stored in a dry place, which cannot be seen by patients and other people and only authorized by the staff member. Keeping the supplies separate is essential. For instance, a cleaning cloth ( worker’s uniform) should be kept separate from mopping equipment. You can make use of shelves and racks. 

Keeping the supplies apart also reduces the pathogens, and this is the staff’s responsibility to maintain the inventory closet. The expired product should be removed from the closet. Even the inventory closet itself needs routine cleaning. Splint the chain of infection keep the patient safe and healthy and also eliminate the unnecessary costs. 

image1 30

Is Cleaning A Movie Theater Is A Challenging Task?

Cleaning the movie theater is the most daunting, challenging task. The managers of the theater face more pressure to maintain the sanitary and cleaning facility. A large amount of public continually comes and goes. If the cleaning is not supported, especially after or during COVID-19, then theater will lose customers and profits. 

For the maintenance of the healthy ambiance of the movie theater, the management mostly hires the janitorial services. Many studies have been proved that contacting janitorial service for movie theater cleaning services improves profits. 

Cleaning Movie Theater Chairs

The movie theater covers many bacteria, germs, and other pathogens, regardless of size or quality. The reasons behind the microorganisms are:

  • The high footfall of the public
  • The lack of time to properly disinfect the equipment present in the movie theater on a regular basis.

These reasons filthy the area which make anybody sick. Many industries recommend and upload their safety checklist not to touch anything and avoid consuming any food items sold even at a concession stand.  Everybody talks about hygiene, but no industry mention anything about profit margin, healthy growth, and longevity. In the current scenario, the movie theater carries a massive portion of the market share.

Unfortunately, if the proper cleaning and hygiene are not set up, then it can lead to a decline in the customer base and downfall in profits to maintain the volume of foot traffic LuxUVC a janitorial company provides you well-experienced cleaning crew. 

The availability of tools and cleaning product with untrained cleaning crew will put a negative impact on the productivity and profits of theaters in the number of ways, including:

  • Poor publicity
  • Chronically ill employees
  • High levels of job dissatisfaction
  • A lack of employee engagement
  • High employee turnover
  • Upset customers

Which Theater Areas To Approach First For Cleaning?

Hiring the experienced custodial team has always been an ideal option because they have specialized equipment and staff training. They thoroughly clean your top-to-bottom cleaning requirements at a minimal cost along with safe storage that is compulsory for placing the product. They have excellent knowledge about the cleaning as to which area need priority or have a high volume of foot traffic.

1. Passageway and Flooring

There have been so many studies had taken place, which shows that theater floors tend to be covered with feces and other contamination. The floor and walkway must be cleaned multiple times, if not possible, before and after closing. The tiles and hard floors in the washrooms and concession area should be moped at the opening and closing of theater and professionally scrubbed weekly. You can also make use of Clorox disinfecting spray or other Clorox clean up.

Vacuum the walkway mats and carpets regularly, and have steamed cleaning at least ones in a month according to the weather and foot traffic.

Cleaning Concession Counters

2. Washrooms

The restrooms have the chance to be understocked and filthy with toilet papers/products or soap, and an unpleasant smell, which can harm your business. Ones the customer left, never return back, and word of mouth is another negative experience through social media or online reviews site.

Paying attention to the soap, toilet paper/product, and floor simultaneously take care of toilet seats, as they don’t have any clogs or blockages, mirrors, sinks, counters, and fixtures before opening and after closing. Check these accessories on a regular basis throughout the day/evening, 

And weekly clean the walls and stalls of the restrooms for that you can use the Clorox disinfecting spray cleaning product.

3. Concession Zone

The concession area at theater faces the same challenges that are faced by the fast-food establishment. Wherever the food is prepared, there will be bacteria and germs. Along with top, food-handling employees, safety is also a greater concern for the management, public, and theater owners. 

Dangerous germs can be passed through ingestion during eating, so wipe off all the utensils with Clorox clean up wipes before putting anything in plate. Maintaining hand hygiene is foremost for concession workers to avoid this virus. 

Clean the food preparation utensils, counters, and area after that disinfect. Be careful and well-maintained the concession area till the time theater is open and ones in a month cleaned and sanitized the entire area.

4. Chairs And Auditorium

Cleaning the auditorium and chairs itself the biggest challenge. The cleaning staff has to tackle the spills on the floor immediately; otherwise, it can create a slippery and sticky surface for customers while exiting from the hall. These sticky surfaces can destroy your soiled carpets, candy, and popcorn decontaminates the auditorium’s floor.

Take care of cupholders, armrests, and chairs because they are covered with feces matter, E.coil, staph, bacteria, and germs as the theater have a large number of seats where regular cleaning is not possible for staff. So two times in a week wipe down, wash, and then disinfect as per the material of the chair and cupholder with Clorox disinfecting spray appliance.

5. Foul Odors

The garbage should be unloaded at the end of the day; otherwise, the rancid smell will originate. The in-depth cleaning and disinfection you can schedule in a week. Bad odor can come from the dampness of any stuff in the kitchen area, clogs, or blockage in the bathroom. So this is the responsibility of the cleaning staff to check the facilities for issues.

The foul odors can also come from the unsanitary soda fountains, and burnt grease that degrades the importance of regular cleaning and maintenance.

After Party Cleaning

Many cleaning products, along with the air toxic, come to avoid making people sick. Like Clorox clean up solution can be combined with other chemicals and occupied the whole building for better smell. The simplest way to remove the bad smell is to have a adequate ventilation after the use of toxic chemical cleaning products.

6. Cross-Contamination

There are some of the embarrassing situations for a business when their unsatisfied customer gives an unfavorable report.  Many cleaning crews use the same towels to clean the concession counter and bathroom or use the theater mop that was used for restrooms. These kinds of cleaning transfer the bacteria, germs which can make customers, management sick.

To avoid this mistake, use the color-coded microfiber cloth or towel and make use of two buckets. Always initiate your cleaning from the most contaminated part, like from top to bottom.  

Ways To Prepare The Theater Cleaning Checklist

1. Exteriors & Entrances

  • Empty the rubbish bins.
  • Sweep and mop the floor & walkways, landings & steps.
  • Collect the trash and dispose of 

2. Box Office & Interior Entrances

  • With Clorox clean up wipe, scrub each window.
  • Empty and refill trash cans
  • Sweep or vacuum the floor several times a day
  • Polish the glass window and counters
  • Sanitize the touchpoints of customers

3. Theater Lobby

  • Scrub the floors and vacuum the carpets
  • After few months steam clean the carpets
  • Mop the kickplates and doors
  • With the stain removal kit, remove the tough stains from the carpets.
  • Dust of the baseboards, light fixtures, and frames in a week.
image1 30

How To Have a Spotless Condo: Cleaning & Disinfecting

It’s an unmatched feeling to have a spotless, clutter-free, and fresh home when you come from outside! Clothes on the sofa or trash lying on the floor not only destroy your mood but also injure you.  If you have a space issue; for example, you are the owner of the Condon and regular cleaning is your primary issue, you can then hire the janitorial service for in-depth cleaning. They are the professionals and have innovative tools and cleaning products like handheld UV light. This cleaning product is used to clean the surfaces, and handheld UVC germ eliminating light is used to kill germs, bacteria, and other microorganisms.

Professional Cleaning Service

Many scholars say that the cleaned environment purifies the mind if you know the keys to happiness. Although, with mental state, the clean home also diminish the allergies, risk from specific diseases, and maintain the hygiene inside the house. Cleaning burns you 205 calories in an hour, whereas it also works as medicine by reducing the stress and anxiety by 20 percent. So follow a schedule to keep the space spick-and-span, cleaning the condo is easier because condominiums are mostly sustainable.

Clean Steadily

Cleaning Of Glass

Whenever you start cleaning the condos, firmly wipe down the stubborn dirt from window shades, blinds, and after that with the help of handheld UV light spray drizzle on the blinds and shades, the dust will not accumulate. Wash the windows with a sponge or with a soft towel and rub the edges. You can also make use of newspaper but make sure after that remove the mildew spots from the window frames. 

Remember that we all buy the expensive condos for the beautiful view. Don’t see that view through a filthy glass window or blinds.

Breeder In The Shower

The shower is considered the breeding ground for the bacteria; the reason behind this is the slime that builds up inside the shower. Many studies have shown that the shower heads contain Mycobacterium avium bugs that give birth to diseases, especially to the lungs.

Don’t clean your shower regularly or weekly, but clean it every month with handheld UVC germ eliminating light. You can scrub the shower nozzles with a toothbrush or do it with your fingers. Dip the shower in white vinegar for a couple of hours while washing off the filter screen to reduce the bacteria.

Disinfect The Ceiling Fan

If you have ceiling fans at your condo that you use often, then dust it off every month. No doubt, the task seems daunting because of blades, height, and different angles. There is a way to clean as LuxUVC suggests; slide open every blade and remove the dust that stays inside. This simple process will prevent you from sinus infections and allergies.

Clean The Upholstery

Condos have more wooden furniture that appeals to eyes to protect them vacuum your furniture regularly, and if you live in a condominium with your pets and kids then repeat this for multiple time. So, next time the dust mites on the sanity, dust it off with vacuum cleaner. Make sure you use a dust brush tool for leather furniture. 

Lamp Light

Lamp lights are widespread in a condominium in various stuff like paper or plastic, nice shade, and whether parchment. But mostly we ignore their cleaning. So, in a month, wash them off if plastic or vacuum them to get proper lighting.

Wipe The Baseboards

During the sweeping or mobbing, some areas are difficult to clean (Hard to reach the surface) and comprise the most dust-like baseboard. Clean the hard-to-reach surface regularly so that they don’t accumulate the dirt. LuxUVC suggests having a soft cloth or dryer sheet and running it along the trim to remove the stain.

Cleaning Of Throw Rags

In the current scenario, condos have throw rags. It is the most common technique design these days. The throw rags, carpet accumulate the dirt as a magnet does. If you have a furry dog or cat as a pet and they like to sleep there, then the stubborn hair gets trap in the rag. Vacuum them regularly and wash them once a month before they give birth to pests and bacteria. You can also buy a slow feeder dog bowl to avoid choking.

Clean And Organize The Closet

Opening the closet multiple times a day is common. To take out the clothes or put in the new clothes, you pile them up, and at the laundry time, when you take the clothes out that everything becomes a mess. Clean and organize clothes, bags, and shoes because of these stuff cause clutter. If you don’t clean it for a couple of months, then it may drive you crazy. For instance, in a hurry, you would not be able to find your shirt, pant, or belt that waste your time.

Clean The Kitchen Area

Almost after office, you may spend time in the kitchen, especially women, and the kitchen is the dirtiest spot in the house. You can clean it with a sponge, but make sure you change the sponges a few months before it becomes the home of bacteria such as salmonella and E-coil. Change the sponge after a month because it is considered a home to the world’s germiest thing. Apart from rinsing, the areas in the kitchen pay attention to the sink also because, after sponge, the sink grabs more fecal bacteria than in the toilet.

Clean The Chopping Board

The chopping board is the tool that everybody ignores in their cleaning checklist. Most even don’t know when last thoroughly clean. Chopping boards are the tool that uses daily for cutting fish and raw meat. Then you usually wash them with simple tap water.

Wash the chopping board daily, but if the chopping board is of wood, then wash it regularly. Sterilize it with baking soda and white vinegar or use the hydrogen peroxide and bleach to remove the bacteria.

Wash the cutting board with the treatment as mentioned above, and make it dirt-free. While following these tips, every corner of the piece of furniture mostly looks new for a year.

What Precautions Should Be Taken While Cleaning The Condos?

  1. If you scrub your condo for in-depth cleaning, then during cleaning, open the windows and breathe the fresh air because it will help you to eradicate the stale odor, which smells awkward to your guests.
  2. For In-depth cleaning, hire experienced professionals like LuxUVC and book the appointment because it’s not easy to find serious cleaners.
Preparing The Cleaning Solution

3. If your condo smells distinct, that bout of nostalgia. Clean those areas foremost where you store your clothes, shoe, or boots.

4. Be careful while cleaning the condo bathroom because whenever you spray any disinfector on the floor or surface, that quickly infects your lungs. Many condos have designed interior areas of the unit. Few of them have a window with them. And if your condo bathroom doesn’t have a window, be extra careful that the spray should be appropriately clean and doesn’t infect the lungs. Always start your cleaning with the bathroom and dispose of the trash. Wipe off the base of the toilet. Consider these things during your cleaning, and your condo will be spotless. That protects you from various diseases.

image2 32

How to Disinfect Your Car during Coronavirus?

The coronavirus has become a serious issue from the past few months. Personal vehicles are among the most frequented modes of transport, but these are also the most severely contaminated spaces that cause the virus to spread. The frequently touched surfaces such as steering wheel, door handles, shift lever, driver door armrests, and various other spaces should be cleaned thoroughly and disinfected to minimize the spread of the infection.

People use cars to avoid interaction with others while traveling, mainly the doctors who need to reach their workplaces even in the lockdown. As much staff published in concern of human health and hygiene, alongside it is also crucial to know the best vehicle disinfected.

Cleaning Car

The center for disease control and prevention (CDC) suggests wearing nonreturnable gloves for disinfecting surfaces. If you see the dirt on the surface, you can start with cleaning, and for eliminating the contaminated germs, you can use disinfectant wipes & sprays or soap & water to keep your vehicle in good condition. To clean the car or any vehicle, you need microfiber cloth damped with soap and water that you can use to scrub the hard surface.

You can clean your car with the all-purpose household product, but be careful; some of them are not ideal for the vehicle. Do not use the benzene, bleach, thinners, hydrogen peroxide, or other harsh and corrosive cleaners because these products can damage your car, interior and upholstery surface.

You can use laundry disinfectant washing powder or alcohol-based disinfectant wipes & sprays (it must contain at least 70 percent alcohol) to make effectively work against COVID-19 as per CDC recommendations as well as safe against disinfecting the vehicle also. For the advertorial, screens are the frequently touched area and it is essential to clean them with the right cleaners and disinfectants. To clean the screen surface, use disinfectant wipes & sprays or soft cloth damped with soap and water.

For the advertorial, you should not use the ammonia-based cleaner for the screen because it damages the anti-fingerprint coatings and anti-glare. 

For the regular cleaning you have to prepare the checklist, don’t forget to add the following points.

  • Center console and armrest
  • Turn signal lever
  • Gear selector
  • Steering wheel
  • Exterior door handles, both sides
  • HVAC vents
  • Parking brake handle, parking brake or release lever
  • Windshield wiper controls
  • Rearview mirror, back and edges
  • Avoid the harsh cleaner on seat belt and buckle because this will devalue the fibres and belt’s strength.
  • Start button
  • Counter stack knobs
  • Interior door pulls from all around
  • Key and remote fob
  • Truck lid

If it is standard cleaning, then you can do it yourself but if your car needs extra attention then you can hire the professionals who can work effectively to keep your car clean. 

How To Do Appropriate Cleaning Of You Car?

For the maintenance of the hygiene atmosphere around your car, it’s essential to clean and sanitized the car. Below discussed the critical points of cleaning a car in the period of COVID-19. So, that you can travel freely:

1. Maintain A Personal Hygiene

  1. The most fundamental measure is to maintain self-hygiene in your vehicle. 
  2. Wash your hands before touching the steering. This will prevent the dangerous pathogens that contaminate your vehicle. 
  3. Wash your hand after completing your journey to ensure the safety of others.
  4. Cover your mouth with a mask adequately while coughing or sneezing because of COVID-19 spread through the respiratory droplets.
  5. Keep the alcohol-based sanitizer in your car along with the trash bag and a box of tissues.

2. Thoroughly Disinfect The Cabin 

The sick person or person with the symptoms of COVID-19 can contaminate the surface and infect others through respiratory droplets. On the surface, the virus can remain active for a few days. However, it is essential to clean the surface grimes and dirt before using an effective disinfectant that works to kill the bacteria and other microorganisms.

Deep Cleaning Of Cabin

Before disinfecting, vacuum the interior of the cabin and remove the dust from the surfaces like door pads, seats, and the dashboards. Remember to clean the hard-surface area and clean the crannies and nooks.

3. Disinfect The High-Touched Surface

  • Once you finish cleaning the cabin, you can begin cleaning the highly-touched surfaces, including both exterior and interior. Such as touchscreens, all the buttons and knobs, seatbelt buckles, seat adjustment levers, hand brake, gear shifter, dashboard, steering wheel, grab handles, and sun visors of the cabin.
  • Scrub the surfaces thoroughly with disinfectant wipes & sprays and remove the contagions grimes. Keep doing this process until the surface gets decontaminated. Choose the disinfectants carefully that do not cause harm to your cabin material, furniture, and electronics. Make-sure avoid using one cleaner for cleaning your entire household as some of them are not suitable to use on a particular surface. Do not use the ammonia and hydrogen peroxide-based product because it will damage your car.
  • There are several interior cleaner and shampoos available in the market to clean the materials. With the help of disinfectant wipes & sprays, clean the door regularly. If buying the exclusive products does not fit into your pocket, you can use old soap. The soap can remove any virus. This is why doctors are recommending washing the hand with soap at least for 20 seconds. Apart from these all, you can choose the generic shampoos to prevent interior trims.
  • With the damped microfiber cloth, you can scrub the door handles and dashboards be careful not to damage any electronics. If any soapy marks left on the surface, then it can be removed with the polish.
  • You can also make use of alcohol, as per the international medical bodies guidelines rubbing the car surface with 60 percent alcohol can decontaminate the car’s interior. The surgical spirit has 70 percent isopropyl alcohol that is safe for cabin material. Drizzle it on the soft cloth and mob the high touched surface.

4. Disinfect The Upholstery

  • Cleaning cars, seatback pockets, headrests, armrests, and backrests are also essential. Use soap & water or alcohol to clean the upholsteries of various fabrics (leather and vinyl).
  • Make sure you clean the upholstery as per material. If the fabric is leather, they avoid using scrubbing or alcohol because it will discolor the material. Use some restraint and after that particular product like condition to maintain the shine of the leather.
  • For fabric upholstery, using too much soap and water make the situation worse because cushioning will seep the soap & water. Use the damped cloth and scrub the seat, or if you don’t want to take the risk, go with dry cleaning or steam cleaning by professionals.

5. Service The HVAC System

Cleaning With Dust Cleaning Brush

Due to COVID-19, it is essential to attribute to comorbid diseases. So servicing the air-conditioner system is suitable for removing bacteria and fungi. Service the system from professionals, and if you want to clean it on your own, then remember to clean the air filter and spray the rear AC vent and air-con vent.

6. Follow Social Distancing 

Social distancing is not only for people but also extends to your vehicle. Do not handle your car with the valet, and at the gas station, make some distance from the pump attendants. Try to pay through digital wallets if possible.

Apart from your workplace and home, most of the time you spend in your car. If anyone or you show some symptoms travel in the car, then the cabin is contaminated, and it alerts that frequent sanitation needs. Follow that step and stay safe from the contagions risk.

image1 30

Are Germ-Killing Lights Better?

UV-C light is the part of the electromagnetic spectrum bounded with lower wavelength extreme of the visible spectrum and x-ray radiation band, which produces spectral range between 100to 400nm, which is invisible to human eyes. UV-light is the most popular choice for industries because it inherits benefits and endless possibilities that require water, air, and surface sterilization. The solutions offered by germicidal UV-C technology are Safer, simpler, and cost-effective. Lux UV-C provides a wide range of products in different units that help safeguard drinking water from harmful microorganisms, food processing plants, hospitals, and many other applications. UV sanitation light is delivered with the low-pressure lamps, high-pressure lamps, and light-emitting diodes to disinfect the surfaces. The low-pressure lamp offers a wavelength of 253.7nm, and also looks likes a fluorescent lamp. High-pressure lamp radiates a broadband UV-C radiation rather than a single line and similar to like HID lamps. LED or light-emitting diode is also a source of UV-C germicidal light. UV light is mainly divided into three categories according to their wavelength frequency.

  • UV-A light has (315-400nm), which is known as long-wave.
  • UV-B light has (280-315nm), which is known as medium-wave.
  • UV-C light has (100-280nm), which is known as short-wave.

UV-A light passes through the atmosphere with little change. UV-B is absorbed 90% or more by atmospheric ozone and UV-C, which is incorporated by atmospheric ozone and has little effect on human health because it has minimal penetration to the earth’s surface. Short wave UV-C light provides a strong germicidal effect and erythema as well as conjunctivitis. When using germicidal UV-light lamps, it is essential to design the system in such a way to avoid leakage and impact caused by it.

Germs killing light for hospitals

Most products absorb UV-C, like standard flat glass absorbs all UV-C light, and also dead skin absorbs a lot of UV-C light so that erythema can be limited. UV-C light is absorbed by RNA and DNA, damaging nucleic acids and preventing microorganisms from infecting and reproducing & leaving them unable to perform vital cellular functions. It takes about 20-25minutes, which is a reliable time for exposure as recommended for UV disinfection.

UV-light sanitizer wand protects the surfaces from bacteria, germs, viruses, and mold that can severely affect your health as well, but with UV-light 21 inch wand usages, you can get the power cleaning. To destroy up to 99.99% of all germs, wave the wand slowly within 1 inch above the surface area for 20 seconds. Ultraviolet light is used to kill or inactive microorganisms and pathogens in various processes like water purification, surface cleaning in multiple areas, food and beverage industries, and environment cleaning. Here are some areas where it can be useful-

UV-C light in the water treatment process: 

When water passes through the ‘light-bath’ of UV-C light, the waterborne bacteria, viruses, and pathogens are destroyed in seconds and clinically tested; this process purifies 99.99 % water. UV-C light also eliminates chlorine, which can cause harmful and irritating effects on the human body and is especially crucial for water purification in pools and spa. UV-C light is also used for wastewater, life sciences, aquaculture, treating ship ballast water, and water reclamation. It is unhealthy, toxic, and hazardous to handle and disinfect water in a traditional way, and without UV-C light. It is safe, environment friendly, and in some cases, more effective like industrial and commercial process and water reclamation.

UV-C light in Air- sterilization process:

In areas as institutions, hospitals where air quality is essential for health, you can use UV-C for controlling, sterilization, and elimination of industrial exhausts which contain harmful solvents. Serious health illness and contaminates like asthma or other respiratory ailments can be cured with germicidal UV purifiers of air because they eliminate the microorganisms which present in the air. Germicidal UV-C light has many benefits in other areas like wastewater plants, farms, kitchens, food & beverage processing plants. In industries like printing, plastics, rubber, were harmful and toxic chemicals produced, UV-C light used to purify the air through germicidal lamps. Other useful areas of air sterilization through UV-C light are healthcare, agriculture, commercial, industrial, residential, and vinyl.

UV-C light in Surface sterilization:

Mostly chemicals are used for surface sterilization, which is crucial in many industries, so it is safe to use UV-C light for the surface cleaning process. In food industries where the processes need to be carried throughout the day without interruption, mainly due to the infection, you can use germicidal ultraviolet light to kill viruses, bacteria, fungi in seconds for preventing shelf life and nutritional value. Furthermore, UV-C light directly works on COVID-19 or novel coronavirus and has beneficial effects. COVID-19 is a disease that is highly infectious and spreads rapidly in the community with direct contact with each other. Germicidal UV-C light helps to reduce the spread of active pathogens like flu and superbug. UV-C light is sufficient to inactivate the organs of viruses and bacteria, and it is essential to disinfect the used surfaces. UV-C light is mainly used to clean the surfaces and rooms because COVID-19 can live on certain surfaces up to three days, so it is crucial to disinfect them at regular intervals.

UVC Sterilization

Usage of 222NM for surface sterilization:

Light sources 222nm excimer lamps provide 100% light output in less than a second and conventional germicidal lamp starting with 50% output and take several minutes to achieve 100% output. UV-C excimer lamps are mercury-free, start instantly, and are available in 20w and 300w, which are essential for bathrooms, toilets, counter-tops.


  • It is mercury-free and has a large production capacity compared to traditional lamps.
  • UV-C excimer lamp is easy to design and have an effective germicidal wavelength for most spores.
  • Excimer lamp has a wide operating temperature and instantaneous on or off.
  • Excimer lamp used in surfaces, Air, water sterilization.

Use of UV-C in Hospitals:

It is crucial to use the UV-C light disinfection in hospital& medical facilities, where the viruses and infection spread from patient to patient and room to room. In these areas, manual cleaning with chemicals is not sufficient to restrict the spread of harmful diseases. UV-C light kills bacteria and viruses faster and high due to other light-based methods of disinfection, such as chemical cleaners and antibiotics. The benefits of germicidal UV-C light disinfection in hospitals are- nursing home, emergency wards, laboratories, dental surgery, medical types of equipment, pharmaceutical storage facilities, and operation theatre.

Use of UV-C light in Food & Beverage processing units:

In food & beverage processing or servicing, industry illness spreads from staff member to a staff member because of the close contact between them. Germicidal UV-C light has shown effective in killing pathogens like coli, and salmonella, which is typical food born bacteria that are the main cause of widespread illness. You can disinfect your surface areas with UV sanitation light and keep your staff and customers happy as well as safe. 

Use of UV-C in Gym training center:   

The close contact and sharing of equipment in gyms, clubs, recreation centers, pools, exercise, and athletic facilities are at a higher risk of spreading viruses and infections. Adding an extra layer of protection using UV-C light disinfection assures your members that their equipment, locker room, etc. are safe to use than other gym or athletic clubs. Some of the specific spaces that can benefit from the UV-C light system are- gyms, fitness clubs and training centers, recreation centers, public pools, basketball courts, tennis courts, hockey rinks.   

image1 30

How to Disinfect Aquariums To Protect Animals?

It is disheartening to see that marine life is in danger because of human innovations and extravagance. We should understand that unbelievable trash is compiled on the local waterways with the impact of these several seawater animals lost their life.

A Cleaned Sea World

Many communities come together to clean the local wildlife home they share together, which is quite rewarding, but it doesn’t take a significant event to make a difference. So many ways are there to protect the sea world. Below discussed some friendly cleaning habits:

1. Collect The Trash and Recycle, Reduce Plastic.

The primary reason sea animal lost their life is pollution and plastic. For example, turtles eat plastic bags for jellyfish, animals get stuck in plastic wrapping, birds muddle in the fishing line, and this all happens because of our human carelessness. These are the things that can easily be avoided by disposing of the trash correctly, reducing and reusing the plastic. Visiting the beach and picking up dumpsters or disposing of at the same moment is perfect. It’s the ideal feeling working with your relatives, friends while visiting the beach by organizing their own clean-up crew.

2. Save Water

Saving the environment will extend the health and money. By following the simple steps; don’t run the water while completing tasks like changing the showerhead, brushing teeth, and watering the plant. This will not only save the water but your money as well.

3. Use The Eco-Friendly Products

Whenever you visit the beach for the cleaning purpose, use environment-friendly products like UVC solutions or UVC sanitizer. This will help to recover marine life.

4. Reduce Energy Consumption

If you want to protect marine life, it’s always useful to leave the car at home. The few things you can do is switch to fluorescent light bulbs, avoid lift and take stairs.

5. Avoid Using The Plastic

Plastic is so dangerous, and it’s killing the sea animals, destroying habitat, and kill near about ten thousands of marine animals in a year. Make sure you carry a reusable water bottle, nondisposable food containers, buy a reusable bag or cloth tote because they recycle and have UVC sanitizer in your bag.

6. Be Alert On Beach

Always clean-up yourself, when you are relaxing, diving, or surfing to the beach. Enjoy in the sea and beach without obstructing with wildlife or replacing the coral or rocks. Encourage others also to respect the sea wildlife environment or enrolling yourself in local beach clean-ups.

7. Avoid Buying Items That Destroy The Marine Life

There are several products in the market which harm the wildlife and fragile coral reefs. Do not purchase items like; tortoiseshell hair accessories, shark protect, and coral jewelry.

8. Choose Viable Seafood.

The population of fish is declined due to excessive demand, unsustainable fishing practices, and habitat whenever you are dining or shopping out, reduce your order for overused genus by selecting seafood that is healthful and imperishable.

What Are The Suitable Ways To Clean The Aquarium?

It’s imperative to clean the fish tank to ensure your fish stay healthy. Cleaning of an aquarium requires regular preservation because the aquarium water becomes harmful to your wish if not cleaned properly. Don’t empty the tank at ones, because it will kill the beneficial bacteria. If you are new to this process and assume that cleaning a small bowl or tank was easy, this is an incorrect assumption because the larger the aquarium is, the easier it would be to stabilize the water.

Cleaning Of Aquarium

Use environmentally friendly products while cleaning for example; UVC solutions are absolutely perfect for regular cleaning or the standard cleaning; you can use the UVC sanitizer. Always keep the following thing in mind before cleaning the aquarium. 

  • Why is the cleaning of the aquarium required?
  • Why is regular cleaning necessary?
  • How many time tank need cleaning?
  • Fish tank parameters
  • How to clean the fish tank?

Ways To Clean The Fish Tank

1. Doing Preparation

Preparation means collecting all supplies that need to clean the fish tank.

a) A Vacuum cleaner

b) A Magnetic Cleaner

c) A bucket of aquarium cleaning products the household chemicals products don’t get into your tank.

d) A latest filter media

e) A clean cloth/towel

f) Water as per the amount of replacement and type of water (freshwater tank or saltwater tank).

h) Water testing appliance

i) If saltwater aquarium then heater and powerhead.

Many aquariums are heavy, so to take the water out of the tank, use a siphon vacuum and a bucket to make the water replacement to the tank.  Without stir up, the debris at the bottom of the tank removes the large decorations or ornaments carefully. Clean the artificial decoration as if you have an artificial plant. Do not remove the live plant; otherwise, it will disturb the root growth.

2. Remove Water from The Tank

Every 2-3 weeks, you need to remove the water by 10-20%. To absorb the water, take the siphon gravel vacuum. To slow down the siphoning process, use your thumb and be attentive that none of the gravel makes it into the tube. The siphons come in two types; some come with longer hoses and others with the built-in regulator to control the flow of water. This process removes the water and cleans the gravel along with removing plenty of water attached to the corners.

3. Detach Algae

Always use the magnetic cleaner for aquarium cleaning. The cleaner consists of two magnets; you can attach the magnet on the inside of the aquarium and outside of the aquarium.  If your aquarium is of acrylic, then make sure you do not put any scratches while cleaning the surface. 

To clean the decoration, make use of a bristled toothbrush and use a bucket of siphoned water. Never use harsh cleaning products or soap; it can lead to the death of fishes

4. Clean The Filter

It depends on the filter’s quality that you need to change the filter or clean the filter. A standard filter is a sponge filter to clean this filter remove and rinse the filter into the bucket of the water that you have removed from the tank. Do not put the filter under the running tap water; otherwise, it will kill the beneficial bacteria necessary for the tank. Other filters like ceramic rings, filter fabric, etc. should be rinsed and returned quickly to avoid the loss of beneficial bacteria.

If your filter has ammonia, ion-exchange, or carbon, you have to change it every week because, after a week, it will no longer absorb the materials.

5. Remove the water

After the cleaning, you need to fill the tank but depend on whether you add the freshwater or saltwater. 

If you want to add fresh water, leave the water out 24 hours in advance so that chlorine in the water will vaporize

If you want to add the saltwater, then observe the three parameters-pH, salinity, and temperature.

PH, Salinity, And Temperature

Cleaning the fish tank should not be an arduous task to keep your fishes healthy and fresh, clean, and maintain the aquarium regularly. If you change the water partially, then it will keep your fish healthy and happy. It also ensures that the beneficial bacteria are not removed or damaged from the aquarium. Cleaning the aquarium and sea world is not a challenging task; just follow the steps.

image2 32

What Steps Should You Follow To Keep The Amusement Park Clean?

The rides, fun, entertainment pop up in mind, and cleaning those parks are challenging whenever you plan to visit the amusement park. Because it requires a lot of maintenance, In-depth and advanced cleaning technologies, need to clean the bacteria and germs from concession stands, restroom, innumerable touches on ride and games—thousands of the tourist visits to the amusement parks and the number increase during holiday season and weekends. 

A View Of Amusement Park

 The visitors increased the germs and waste. It’s impossible to clean the amusement park by standard cleaners; even it’s a difficult task for cleaning companies. Below are some tips to keep yourself safe.

1. Obey The Park Rules

Parents should take care of their kids that, they follow the park because when they don’t do the accident happens. Teenagers climb the fence, take overload ride with friends, or don’t pay attention to the warnings of the employees. The poster signs in the parking area are for your safety, so read carefully and follow.

2. Keep Attentive Towards Your Kids

Whenever you visit an amusement park, keep an eye on your kids, and their movement, it is a necessary safety step. When you visit the park, separate your kid from the park and guide to a safe place. So that if your kid gets lost, they can come to the place you suggest to them. Set a designated place that everyone can meet if separation occurs. Along with this watch off your kids, that no stranger will approach and speak to your child.

3. Acclaim The Power Of Water

If you visit with your family at a water park, you have to keep in mind the extra precautions. You must have a well-knowledge about your child’s swimming ability and keep them away from the wave pools. Some parks offer the lifeguard vests tubes that help your child to swim. Always apply sunscreen after your child comes out from the pool. Stay with your child that you can respond if they scared, overwhelmed, and disoriented a water attraction. Also, teach your child not to swallow the pool water as it contains contain chlorinated water. Hiring a professional pool cleaning services Atlanta will help.

4. Take Breaks After Rollercoaster Rides

High-speed rides exert the significant vibrations that impact the body, and taking it without any break can jerk movements that can strain joints and necks. So, it’s advisable to take a break (10-15 minutes) between the extreme rides. To get your body into equilibrium.

5. Stay Hydrated

Be careful with food and drink when you visit, especially in summer, your body needs more water. So on your trip, stay hydrated. The signboards also recommend avoiding caffeine and candy. Because if you have these snacks before your ride, you will put a damper on everyone’s fun. 

6. Choose The Rides As Per The Age

The amusement park’s signboards advise the parents to go on rides with children until the time you are not sure that you kids can understand and follow the safety rules. Start with the slower riders and teach your child to ride with eye front so that during the ride, they don’t feel any jerking movement. Apart from this, if you are not sure about your child age-appropriate ride, you can take expert advice. If your child feels scared for any reason, then for the next ride, alert the operator before it starts. 

7. Carefully Bar, Belt, Strap, Or Latch

Always be careful when the ride begins because, as in all the rides, the attendant walks down and check everyone’s is properly seated, with appropriate strap, belt, and latch. But this is also your primary responsibility to double-check your safety gear. LuxUVC recommends that keep all your body parts inside the ride, and your belongings in your pocket or zipped so that you don’t fall injury. 

Teach your child that they don’t stand on the ride and unbelt or unstrap themself if the ride stops in between because it may start again in a short time. 

Cleaning The Surfaces

8. Understand The Sign Of Injury

If your child shows signs like headaches or vomiting, fatigue, dizziness, or weakness, you should first consult the first aid station. If your child gets recover, he continues to enjoy, and if the child is not stable, then keep him off from the rides. 

9. Have Predicament Plan

Crowed is dangerous for the kids because they easily get trampled. So keep them an emergency plan with you when you take your kids to park because in case of any violence, sudden weather, outbreak, or accident, you can quickly get out. In your plan, always have a strategy to avoid the main entrances.  

Tips To Clean The Amusement Park.

Cleaning the amusement park is essential to prevent litter, minimize the cross-contamination, and reduce waste. Below discussed the key points that need to clean.

1. Do A Waste Audit

Doing a waste audit sounds awkward, but it is essential to do if you start the best cleaning technology. By going through the waste, you can analyze what percent is organic, garbage, and recycled. By following this tip, you can determine the entire amount of waste across the park.

2. Make-Sure The Salvage is Durable

Visiting the amusement park is not easy in the summer months because adults don’t like to go outside, but children are ready for free from school. So, always take them out but with sturdy construction and dependable material. Ninety-seven percent of bins are made up of recycled HDPE. The reliable material is doesn’t rot, UV resistant, waterproof, and sturdy in extreme weather conditions. 

3. Restrooms Cleaning

The Amusement parks had a lot of traffic to cope up with that traffic. Avoid bacteria, viruses, and other microorganisms, the cleaning crew must clean the frequently touched points throughout the day. The restroom needs extensive cleaning regularly, and for that, you need advanced cleaning technologies. The best cleaning technology removes the dirt, soil, and sweat from the restroom floors, sinks, toilets, and touchpoints. 

Concession Stands

4. Cleaning Of Concession Stands

Concession Stands are the reproduction ground of bacteria. These stands are frequently used in a day for spilled sodas, food. To keep these areas free, the cleaning crew should immediately clean the trash and spilled items. A sponge is the best cleaning system for tables, counters, and other flat surfaces, you can quickly and easily clean the surface with one pass. Always have portable cleaning products because it gives flexibility to cleaning crew so that they can cover plenty of ground during open hours.

5. Major Touch Points And Rides

Always give priority to the major touch points to avoid bacteria and germs. Deep clean the ride from handlebars to arcade game buttons. During the operation hours, it is difficult because of the traffic waiting for their turn, but at that time, you can clean the other touch points that are not highly touched to limit the spread of bacteria.

If the cleaning crew uses the towel for cleaning, the touch points follow the proper procedure to avoid cross-contamination. Always take new towels for cleaning the different surfaces, or you can take the disposable wipes. These wipes will save your cost and attracts more visits to the park.